涡旋提取-改进BCR法测定土壤中重金属的化学形态

土壤中重金属的化学形态更能表明其迁移性和生物毒性。传统的重金属化学形态检测方法BCR法由于其提取时间长,影响检测效率。采用涡旋提取对传统BCR法进行方法优化,对土壤中Cu、Zn、Pb、Cd、Ni、Cr等6种重金属元素化学形态进行了实验分析。研究了涡旋转速、涡旋时间以及涡旋提取的方法精密度与准确度。结果表明,当涡旋转速为2500rpm,酸可交换态涡旋10min,可还原态涡旋10min,可氧化态涡旋5min时,涡旋提取效果良好。采用土壤标准物质对方法的适用性进行了验证,6种元素的检出限在0.4?32μg/kg,测定值均在标准值范围内,相对标准偏差在0.3%?5.5%之间。涡旋提取-改进BCR法分析速度快,灵敏度高,能满足同时测定土壤中多种金属元素化学形态的检测要求。     

微波促进碱性离子液体催化合成查尔酮

以4-氯-1-丁醇,N-甲基咪唑和苯甲酸钠为原料,用微波法制得碱性离子液体{[OHBMIM]Ph COO(AIL)},其结构经FT-IR表征;以苯甲醛和苯乙酮为原料,AIL为催化剂,经微波促进的缩合反应合成了查尔酮(1),其结构经1H NMR和FT-IR确证。考察了AIL用量、微波功率、物料比和反应时间对1产率的影响。合成1的最佳反应条件为:AIL 1 mmol,苯甲醛5 mmol,n(苯甲醛)∶n(苯乙酮)=1.1,于微波功率140 W反应5 min,产率95.8%。AIL具有较好的循环使用性,循环使用6次,1产率没有明显降低。     

Radical Compatibility with Nonaqueous Electrolytes and Its Impact on an All‐Organic Redox Flow Battery

Nonaqueous redox flow batteries hold the promise of achieving higher energy density because of the broader voltage window than aqueous systems, but their current performance is limited by low redox material concentration, cell efficiency, cycling stability, and current density. We report a new nonaqueous all‐organic flow battery based on high concentrations of redox materials, which shows significant, comprehensive improvement in flow battery performance. A mechanistic electron spin resonance study reveals that the choice of supporting electrolytes greatly affects the chemical stability of the charged radical species especially the negative side radical anion, which dominates the cycling stability of these flow cells. This finding not only increases our fundamental understanding of performance degradation in flow batteries using radical‐based redox species, but also offers insights toward rational electrolyte optimization for improving the cycling stability of these flow batteries.     

Carboxylated graphene oxide/polyvinyl chloride as solid-phase extraction sorbent combined with ion chromatography for the determination of sulfonamides in cosmetics

A carboxylated graphene oxide/polyvinyl chloride (CGO/PVC) material was prepared as a sorbent for the selective extraction of sulphonamides from complex sample. After being dispersed in buffer solution, sample was transferred into the prefabricated solid-phase extraction (SPE) column, which integrated extraction and cleanup into one single-step. A multi-response optimization based on the Box-Behnken design was used to optimize factors affecting extraction efficiency. Compared with the commonly commercial sorbents including MCX, WCX and C₁₈, CGO/PVC hybrid material had higher extraction selectivity and capacity to sulphonamides. The limits of detection and quantification for seven target compounds were in the range of 3.4–7.1 μg/L and 11.4–23.7 μg/L, respectively. The self-assembly SPE cartridge was successfully used to enrich seven analytes in anti-acne cosmetics prior to ion chromatography detection with good recoveries of 87.8–102.0% and relative standard deviations of 1.2–6.4%, implying that this method was suitable for routine analysis of cosmetics.     

Decolorization and mineralization of yellow 5 (E102) by UV/Fe2+/H2O2 process. Optimization of the operational conditions by response surface methodology

In this study, the optimization and implementation of a homogeneous photo-Fenton process for the decolorization and mineralization of a wastewater containing highly concentrated yellow 5 (E102) dye, resulting from an industry placed in the suburbs of Medellin (Colombia), is presented. Response surface methodology was applied as a tool for the optimization of operational conditions such as initial dyestuff concentration, H₂O₂ concentration, and UV-radiation power (number of lamps). The decolorization, degradation and mineralization efficiencies were used as response variables. The following conditions were found to be optimal for decolorization and mineralization of yellow 5: UV radiation of 365 nm (4 W, one lamp), dye concentration of 200 mg/L, Fe²⁺ concentration of 1.0 mM, H₂O₂ concentration of 1.75 mL/L, treatment time of 180 min, Fe²⁺ concentration of 1 mM and pH = 3. Under these conditions (180 min), the photo-Fenton process allowed us to reach ca. 100% of color dye degradation, 99% of COD degradation, and 85% of mineralization (TOC). The scavenging effect of the Cl^– anion on the photodegradation process was also confirmed.     

融合插值点优化的多项式结构宽带波束形成器设计方法*

多项式结构设计方法是主瓣指向可调宽带波束形成器设计的一类重要方法。多项式结构的阶数是有限的,导致主瓣实际指向与期望指向之间存在偏差,因而影响了波束形成器的指向性指数。针对这一问题,该文提出了一种基于插值点优化的多项式结构宽带波束形成器设计方法。首先,引入多项式结构插值点处阵列响应的空间导数约束,以减小主瓣指向偏差;进而利用粒子群优化算法对多项式结构中的插值点进行优化,以充分利用插值点位置提供的自由度进一步提升多项式结构宽带波束形成器的性能。优化设计结果表明,与现有设计方法相比,该文提出的方法不仅降低了主瓣的指向偏差,同时也提高了指向性指数,有效改善了多项式结构宽带波束形成器的性能。     

Energy-efficient beamforming optimization for MISO communication based on reconfigurable intelligent surface

Reconfigurable intelligent surface (RIS), a planar metasurface consisting of a large number of low-cost reflecting elements, has received much attention due to its ability to improve both the spectrum and energy efficiency (EE) by reconfiguring the wireless propagation environment. In this paper, we propose a base station (BS) beamforming and RIS phase shift optimization technique that maximizes the EE of a RIS-aided multiple-input–single-output system. In particular, considering the system circuits’ energy consumption, an EE maximization problem is formulated by jointly optimizing the active beamforming at the BS and the passive beamforming at the RIS, under the constraints of each user’ rate requirement, the BS’s maximal transmit power budget and unit-modulus constraint of the RIS phase shifts. Due to the coupling of optimization variables, this problem is a complex non-convex optimization problem, and it is challenging to solve it directly. To overcome this obstacle, we divide the problem into active and passive beamforming optimization subproblems. For the first subproblem, the active beamforming is given by the maximum ratio transmission optimal strategy. For the second subproblem, the optimal phase shift matrix at the RIS is obtained by exploiting sine cosine algorithm (SCA). Moreover, for this case where each reflection element’s working state is controlled by a circuit switch, each reflection element’s switch value is optimized with the aid of particle swarm optimization algorithm. Finally, numerical results verify the effectiveness of our proposed algorithm compared to other algorithms.     

Raney Ni催化生物基糠醛还原胺化合成糠胺

生物质衍生物糠醛还原胺化是合成糠胺的一种有效方法。本文以糠醛为原料、氨水为氨源,使用商业Raney Ni催化糠醛还原胺化合成糠胺,考察了氢压、温度、n(糠醛)/n(氨水)、溶剂、催化剂用量等条件对反应的影响。实验结果表明：在1,4-二氧六环溶剂中,0.03 g Raney Ni、n(糠醛)/n(氨水)=1/2、130 ℃、2.0 MPa H₂条件下反应3 h,糠醛转化率100%,糠胺选择性96.3%。与传统方法相比,该工艺实现了非贵金属催化剂作用下高选择性反应,具有操作简单、低成本、收率高等优点。